Welcome Alloy 6060
Alloy 6060 has a strength slightly lower than 6005A. It has very good weldability and very good plus corrosion resistance. This alloy is commonly used for complex cross sections and also has a very good anodizing response. Applications for alloy 6060: Interior sections, architectural sections, frame systems, fences, railings, ladder, furniture, office equipment, electronic modules.
| Alloy | Chemicial Composition | Other | Other | Al. | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Each | Total | Min | |
| 6060 | 0.30 to 0.60 | 0.10 to 0.30 | 0.10 max | 0.10 max | 0.35 to 0.60 | 0.05 max | 0.15 max | 0.10 max | 0.05 max | 0.15 max | Residual |
Mechanical Properties
| Alloy | Temper | Thickness | Tensile Strength (MPA) | Proof Stress (MPA) | Elongation % | Hardness | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| Over | Up to | Min | Max | Min | Max | Webster | Rockwell E | |||
| 6060 or 6063 | T4 | All Thickness | 130 | – | 70 | – | 14 min | 4 – 7 | 41 – 54 | |
| T5 | All Thickness | 150 | – | 110 | – | 8 min | 8 min | 55 min | ||
| T52 | All Thickness | 150 | 205 | 110 | 170 | 8 min | 8- 11 | 55 – 70 | ||
| T6 | All Thickness | 205 | – | 170 | – | 8 min | 8 min | 70 min | ||
